Functions
	HAL_ENUM (HAL_Counter_Mode)
	The counter mode. More...

HAL_CounterHandle	HAL_InitializeCounter (HAL_Counter_Mode mode, int32_t index, int32_t status)
	Initializes a counter. More...

void	HAL_FreeCounter (HAL_CounterHandle counterHandle, int32_t *status)
	Frees a counter. More...

void	HAL_SetCounterAverageSize (HAL_CounterHandle counterHandle, int32_t size, int32_t *status)
	Sets the average sample size of a counter. More...

void	HAL_SetCounterUpSource (HAL_CounterHandle counterHandle, HAL_Handle digitalSourceHandle, HAL_AnalogTriggerType analogTriggerType, int32_t *status)
	Sets the source object that causes the counter to count up. More...

void	HAL_SetCounterUpSourceEdge (HAL_CounterHandle counterHandle, HAL_Bool risingEdge, HAL_Bool fallingEdge, int32_t *status)
	Sets the up source to either detect rising edges or falling edges. More...

void	HAL_ClearCounterUpSource (HAL_CounterHandle counterHandle, int32_t *status)
	Disables the up counting source to the counter. More...

void	HAL_SetCounterDownSource (HAL_CounterHandle counterHandle, HAL_Handle digitalSourceHandle, HAL_AnalogTriggerType analogTriggerType, int32_t *status)
	Sets the source object that causes the counter to count down. More...

void	HAL_SetCounterDownSourceEdge (HAL_CounterHandle counterHandle, HAL_Bool risingEdge, HAL_Bool fallingEdge, int32_t *status)
	Sets the down source to either detect rising edges or falling edges. More...

void	HAL_ClearCounterDownSource (HAL_CounterHandle counterHandle, int32_t *status)
	Disables the down counting source to the counter. More...

void	HAL_SetCounterUpDownMode (HAL_CounterHandle counterHandle, int32_t *status)
	Sets standard up / down counting mode on this counter. More...

void	HAL_SetCounterExternalDirectionMode (HAL_CounterHandle counterHandle, int32_t *status)
	Sets directional counting mode on this counter. More...

void	HAL_SetCounterSemiPeriodMode (HAL_CounterHandle counterHandle, HAL_Bool highSemiPeriod, int32_t *status)
	Sets Semi-period mode on this counter. More...

void	HAL_SetCounterPulseLengthMode (HAL_CounterHandle counterHandle, double threshold, int32_t *status)
	Configures the counter to count in up or down based on the length of the input pulse. More...

int32_t	HAL_GetCounterSamplesToAverage (HAL_CounterHandle counterHandle, int32_t *status)
	Gets the Samples to Average which specifies the number of samples of the timer to average when calculating the period. More...

void	HAL_SetCounterSamplesToAverage (HAL_CounterHandle counterHandle, int32_t samplesToAverage, int32_t *status)
	Sets the Samples to Average which specifies the number of samples of the timer to average when calculating the period. More...

void	HAL_ResetCounter (HAL_CounterHandle counterHandle, int32_t *status)
	Resets the Counter to zero. More...

int32_t	HAL_GetCounter (HAL_CounterHandle counterHandle, int32_t *status)
	Reads the current counter value. More...

double	HAL_GetCounterPeriod (HAL_CounterHandle counterHandle, int32_t *status)

void	HAL_SetCounterMaxPeriod (HAL_CounterHandle counterHandle, double maxPeriod, int32_t *status)
	Sets the maximum period where the device is still considered "moving". More...

void	HAL_SetCounterUpdateWhenEmpty (HAL_CounterHandle counterHandle, HAL_Bool enabled, int32_t *status)
	Selects whether you want to continue updating the event timer output when there are no samples captured. More...

HAL_Bool	HAL_GetCounterStopped (HAL_CounterHandle counterHandle, int32_t *status)
	Determines if the clock is stopped. More...

HAL_Bool	HAL_GetCounterDirection (HAL_CounterHandle counterHandle, int32_t *status)
	Gets the last direction the counter value changed. More...

void	HAL_SetCounterReverseDirection (HAL_CounterHandle counterHandle, HAL_Bool reverseDirection, int32_t *status)
	Sets the Counter to return reversed sensing on the direction. More...

Detailed Description

Function Documentation

◆ HAL_ClearCounterDownSource()

void HAL_ClearCounterDownSource	(	HAL_CounterHandle	counterHandle,
		int32_t *	status
	)

Disables the down counting source to the counter.

Parameters

[in]	counterHandle	the counter handle
[out]	status	Error status variable. 0 on success.

◆ HAL_ClearCounterUpSource()

void HAL_ClearCounterUpSource	(	HAL_CounterHandle	counterHandle,
		int32_t *	status
	)

Disables the up counting source to the counter.

Parameters

[in]	counterHandle	the counter handle
[out]	status	Error status variable. 0 on success.

◆ HAL_ENUM()

HAL_ENUM ( HAL_Counter_Mode )

The counter mode.

◆ HAL_FreeCounter()

void HAL_FreeCounter	(	HAL_CounterHandle	counterHandle,
		int32_t *	status
	)

Frees a counter.

Parameters

[in]	counterHandle	the counter handle
[out]	status	Error status variable. 0 on success.

◆ HAL_GetCounter()

int32_t HAL_GetCounter	(	HAL_CounterHandle	counterHandle,
		int32_t *	status
	)

Reads the current counter value.

Reads the value at this instant. It may still be running, so it reflects the current value. Next time it is read, it might have a different value.

Parameters

[in]	counterHandle	the counter handle
[out]	status	Error status variable. 0 on success.

Returns: the current counter value

◆ HAL_GetCounterDirection()

HAL_Bool HAL_GetCounterDirection	(	HAL_CounterHandle	counterHandle,
		int32_t *	status
	)

Gets the last direction the counter value changed.

Parameters

[in]	counterHandle	the counter handle
[out]	status	Error status variable. 0 on success.

Returns: the last direction the counter value changed

◆ HAL_GetCounterPeriod()

double HAL_GetCounterPeriod	(	HAL_CounterHandle	counterHandle,
		int32_t *	status
	)

◆ HAL_GetCounterSamplesToAverage()

int32_t HAL_GetCounterSamplesToAverage	(	HAL_CounterHandle	counterHandle,
		int32_t *	status
	)

Gets the Samples to Average which specifies the number of samples of the timer to average when calculating the period.

Perform averaging to account for mechanical imperfections or as oversampling to increase resolution.

Parameters

[in]	counterHandle	the counter handle
[out]	status	Error status variable. 0 on success.

Returns: SamplesToAverage The number of samples being averaged (from 1 to 127)

◆ HAL_GetCounterStopped()

HAL_Bool HAL_GetCounterStopped	(	HAL_CounterHandle	counterHandle,
		int32_t *	status
	)

Determines if the clock is stopped.

Determine if the clocked input is stopped based on the MaxPeriod value set using the SetMaxPeriod method. If the clock exceeds the MaxPeriod, then the device (and counter) are assumed to be stopped and it returns true.

Parameters

[in]	counterHandle	the counter handle
[out]	status	Error status variable. 0 on success.

Returns: true if the most recent counter period exceeds the MaxPeriod value set by SetMaxPeriod

◆ HAL_InitializeCounter()

HAL_CounterHandle HAL_InitializeCounter	(	HAL_Counter_Mode	mode,
		int32_t *	index,
		int32_t *	status
	)

Initializes a counter.

Parameters

[in]	mode	the counter mode
[in]	index	the compressor index (output)
[out]	status	Error status variable. 0 on success.

Returns: the created handle

◆ HAL_ResetCounter()

void HAL_ResetCounter	(	HAL_CounterHandle	counterHandle,
		int32_t *	status
	)

Resets the Counter to zero.

Sets the counter value to zero. This does not effect the running state of the counter, just sets the current value to zero.

Parameters

[in]	counterHandle	the counter handle
[out]	status	Error status variable. 0 on success.

◆ HAL_SetCounterAverageSize()

void HAL_SetCounterAverageSize	(	HAL_CounterHandle	counterHandle,
		int32_t	size,
		int32_t *	status
	)

Sets the average sample size of a counter.

Parameters

[in]	counterHandle	the counter handle
[in]	size	the size of samples to average
[out]	status	Error status variable. 0 on success.

◆ HAL_SetCounterDownSource()

void HAL_SetCounterDownSource	(	HAL_CounterHandle	counterHandle,
		HAL_Handle	digitalSourceHandle,
		HAL_AnalogTriggerType	analogTriggerType,
		int32_t *	status
	)

Sets the source object that causes the counter to count down.

Parameters

[in]	counterHandle	the counter handle
[in]	digitalSourceHandle	the digital source handle (either a HAL_AnalogTriggerHandle or a HAL_DigitalHandle)
[in]	analogTriggerType	the analog trigger type if the source is an analog trigger
[out]	status	Error status variable. 0 on success.

◆ HAL_SetCounterDownSourceEdge()

void HAL_SetCounterDownSourceEdge	(	HAL_CounterHandle	counterHandle,
		HAL_Bool	risingEdge,
		HAL_Bool	fallingEdge,
		int32_t *	status
	)

Sets the down source to either detect rising edges or falling edges.

Note that both are allowed to be set true at the same time without issues.

Parameters

[in]	counterHandle	the counter handle
[in]	risingEdge	true to trigger on rising
[in]	fallingEdge	true to trigger on falling
[out]	status	Error status variable. 0 on success.

◆ HAL_SetCounterExternalDirectionMode()

void HAL_SetCounterExternalDirectionMode	(	HAL_CounterHandle	counterHandle,
		int32_t *	status
	)

Sets directional counting mode on this counter.

The direction is determined by the B input, with counting happening with the A input.

Parameters

[in]	counterHandle	the counter handle
[out]	status	Error status variable. 0 on success.

◆ HAL_SetCounterMaxPeriod()

void HAL_SetCounterMaxPeriod	(	HAL_CounterHandle	counterHandle,
		double	maxPeriod,
		int32_t *	status
	)

Sets the maximum period where the device is still considered "moving".

Sets the maximum period where the device is considered moving. This value is used to determine the "stopped" state of the counter using the HAL_GetCounterStopped method.

Parameters

[in]	counterHandle	the counter handle
[in]	maxPeriod	the maximum period where the counted device is considered moving in seconds
[out]	status	Error status variable. 0 on success.

◆ HAL_SetCounterPulseLengthMode()

void HAL_SetCounterPulseLengthMode	(	HAL_CounterHandle	counterHandle,
		double	threshold,
		int32_t *	status
	)

Configures the counter to count in up or down based on the length of the input pulse.

This mode is most useful for direction sensitive gear tooth sensors.

Parameters

[in]	counterHandle	the counter handle
[in]	threshold	The pulse length beyond which the counter counts the opposite direction (seconds)
[out]	status	Error status variable. 0 on success.

◆ HAL_SetCounterReverseDirection()

void HAL_SetCounterReverseDirection	(	HAL_CounterHandle	counterHandle,
		HAL_Bool	reverseDirection,
		int32_t *	status
	)

Sets the Counter to return reversed sensing on the direction.

This allows counters to change the direction they are counting in the case of 1X and 2X quadrature encoding only. Any other counter mode isn't supported.

Parameters

[in]	counterHandle	the counter handle
[in]	reverseDirection	true if the value counted should be negated.
[out]	status	Error status variable. 0 on success.

◆ HAL_SetCounterSamplesToAverage()

void HAL_SetCounterSamplesToAverage	(	HAL_CounterHandle	counterHandle,
		int32_t	samplesToAverage,
		int32_t *	status
	)

Sets the Samples to Average which specifies the number of samples of the timer to average when calculating the period.

Perform averaging to account for mechanical imperfections or as oversampling to increase resolution.

Parameters

[in]	counterHandle	the counter handle
[in]	samplesToAverage	The number of samples to average from 1 to 127
[out]	status	Error status variable. 0 on success.

◆ HAL_SetCounterSemiPeriodMode()

void HAL_SetCounterSemiPeriodMode	(	HAL_CounterHandle	counterHandle,
		HAL_Bool	highSemiPeriod,
		int32_t *	status
	)

Sets Semi-period mode on this counter.

The counter counts up based on the time the input is triggered. High or Low depends on the highSemiPeriod parameter.

Parameters

[in]	counterHandle	the counter handle
[in]	highSemiPeriod	true for counting when the input is high, false for low
[out]	status	Error status variable. 0 on success.

◆ HAL_SetCounterUpdateWhenEmpty()

void HAL_SetCounterUpdateWhenEmpty	(	HAL_CounterHandle	counterHandle,
		HAL_Bool	enabled,
		int32_t *	status
	)

Selects whether you want to continue updating the event timer output when there are no samples captured.

The output of the event timer has a buffer of periods that are averaged and posted to a register on the FPGA. When the timer detects that the event source has stopped (based on the MaxPeriod) the buffer of samples to be averaged is emptied.

If you enable the update when empty, you will be notified of the stopped source and the event time will report 0 samples.

If you disable update when empty, the most recent average will remain on the output until a new sample is acquired.

You will never see 0 samples output (except when there have been no events since an FPGA reset) and you will likely not see the stopped bit become true (since it is updated at the end of an average and there are no samples to average).

Parameters

[in]	counterHandle	the counter handle
[in]	enabled	true to enable counter updating with no samples
[out]	status	Error status variable. 0 on success.

◆ HAL_SetCounterUpDownMode()

void HAL_SetCounterUpDownMode	(	HAL_CounterHandle	counterHandle,
		int32_t *	status
	)

Sets standard up / down counting mode on this counter.

Up and down counts are sourced independently from two inputs.

Parameters

[in]	counterHandle	the counter handle
[out]	status	Error status variable. 0 on success.

◆ HAL_SetCounterUpSource()

void HAL_SetCounterUpSource	(	HAL_CounterHandle	counterHandle,
		HAL_Handle	digitalSourceHandle,
		HAL_AnalogTriggerType	analogTriggerType,
		int32_t *	status
	)

Sets the source object that causes the counter to count up.

Parameters

[in]	counterHandle	the counter handle
[in]	digitalSourceHandle	the digital source handle (either a HAL_AnalogTriggerHandle or a HAL_DigitalHandle)
[in]	analogTriggerType	the analog trigger type if the source is an analog trigger
[out]	status	Error status variable. 0 on success.

◆ HAL_SetCounterUpSourceEdge()

void HAL_SetCounterUpSourceEdge	(	HAL_CounterHandle	counterHandle,
		HAL_Bool	risingEdge,
		HAL_Bool	fallingEdge,
		int32_t *	status
	)

Sets the up source to either detect rising edges or falling edges.

Note that both are allowed to be set true at the same time without issues.

Parameters

[in]	counterHandle	the counter handle
[in]	risingEdge	true to trigger on rising
[in]	fallingEdge	true to trigger on falling
[out]	status	Error status variable. 0 on success.

Functions

Detailed Description

Function Documentation

◆ HAL_ClearCounterDownSource()

◆ HAL_ClearCounterUpSource()

◆ HAL_ENUM()

◆ HAL_FreeCounter()

◆ HAL_GetCounter()

◆ HAL_GetCounterDirection()

◆ HAL_GetCounterPeriod()

◆ HAL_GetCounterSamplesToAverage()

◆ HAL_GetCounterStopped()

◆ HAL_InitializeCounter()

◆ HAL_ResetCounter()

◆ HAL_SetCounterAverageSize()

◆ HAL_SetCounterDownSource()

◆ HAL_SetCounterDownSourceEdge()

◆ HAL_SetCounterExternalDirectionMode()

◆ HAL_SetCounterMaxPeriod()

◆ HAL_SetCounterPulseLengthMode()

◆ HAL_SetCounterReverseDirection()

◆ HAL_SetCounterSamplesToAverage()

◆ HAL_SetCounterSemiPeriodMode()

◆ HAL_SetCounterUpdateWhenEmpty()

◆ HAL_SetCounterUpDownMode()

◆ HAL_SetCounterUpSource()

◆ HAL_SetCounterUpSourceEdge()