CAN Stream Functions

Classes
struct	HAL_CANStreamMessage
	Storage for CAN Stream Messages. More...

Macros
#define	HAL_CAN_SEND_PERIOD_NO_REPEAT   0
#define	HAL_CAN_SEND_PERIOD_STOP_REPEATING   -1
#define	HAL_CAN_IS_FRAME_REMOTE   0x80000000
#define	HAL_CAN_IS_FRAME_11BIT   0x40000000
#define	HAL_ERR_CANSessionMux_InvalidBuffer   -44086
#define	HAL_ERR_CANSessionMux_MessageNotFound   -44087
#define	HAL_WARN_CANSessionMux_NoToken   44087
#define	HAL_ERR_CANSessionMux_NotAllowed   -44088
#define	HAL_ERR_CANSessionMux_NotInitialized   -44089
#define	HAL_ERR_CANSessionMux_SessionOverrun   44050

Functions
void	HAL_CAN_SendMessage (uint32_t messageID, const uint8_t *data, uint8_t dataSize, int32_t periodMs, int32_t *status)
	Sends a CAN message. More...
void	HAL_CAN_ReceiveMessage (uint32_t *messageID, uint32_t messageIDMask, uint8_t *data, uint8_t *dataSize, uint32_t *timeStamp, int32_t *status)
	Receives a CAN message. More...
void	HAL_CAN_OpenStreamSession (uint32_t *sessionHandle, uint32_t messageID, uint32_t messageIDMask, uint32_t maxMessages, int32_t *status)
	Opens a CAN stream. More...
void	HAL_CAN_CloseStreamSession (uint32_t sessionHandle)
	Closes a CAN stream. More...
void	HAL_CAN_ReadStreamSession (uint32_t sessionHandle, struct HAL_CANStreamMessage *messages, uint32_t messagesToRead, uint32_t *messagesRead, int32_t *status)
	Reads a CAN stream message. More...
void	HAL_CAN_GetCANStatus (float *percentBusUtilization, uint32_t *busOffCount, uint32_t *txFullCount, uint32_t *receiveErrorCount, uint32_t *transmitErrorCount, int32_t *status)
	Gets CAN status information. More...

Detailed Description

Macro Definition Documentation

HAL_CAN_IS_FRAME_11BIT

#define HAL_CAN_IS_FRAME_11BIT   0x40000000

HAL_CAN_IS_FRAME_REMOTE

#define HAL_CAN_IS_FRAME_REMOTE   0x80000000

HAL_CAN_SEND_PERIOD_NO_REPEAT

#define HAL_CAN_SEND_PERIOD_NO_REPEAT   0

HAL_CAN_SEND_PERIOD_STOP_REPEATING

#define HAL_CAN_SEND_PERIOD_STOP_REPEATING   -1

HAL_ERR_CANSessionMux_InvalidBuffer

#define HAL_ERR_CANSessionMux_InvalidBuffer   -44086

HAL_ERR_CANSessionMux_MessageNotFound

#define HAL_ERR_CANSessionMux_MessageNotFound   -44087

HAL_ERR_CANSessionMux_NotAllowed

#define HAL_ERR_CANSessionMux_NotAllowed   -44088

HAL_ERR_CANSessionMux_NotInitialized

#define HAL_ERR_CANSessionMux_NotInitialized   -44089

HAL_ERR_CANSessionMux_SessionOverrun

#define HAL_ERR_CANSessionMux_SessionOverrun   44050

HAL_WARN_CANSessionMux_NoToken

#define HAL_WARN_CANSessionMux_NoToken   44087

Function Documentation

HAL_CAN_CloseStreamSession()

void HAL_CAN_CloseStreamSession

(

uint32_t

sessionHandle

)

Closes a CAN stream.

Parameters

sessionHandle

the session to close

HAL_CAN_GetCANStatus()

void HAL_CAN_GetCANStatus	(	float *	percentBusUtilization,
		uint32_t *	busOffCount,
		uint32_t *	txFullCount,
		uint32_t *	receiveErrorCount,
		uint32_t *	transmitErrorCount,
		int32_t *	status
	)

Gets CAN status information.

Parameters

[out]	percentBusUtilization	the bus utilization
[out]	busOffCount	the number of bus off errors
[out]	txFullCount	the number of tx full errors
[out]	receiveErrorCount	the number of receive errors
[out]	transmitErrorCount	the number of transmit errors
[out]	status	Error status variable. 0 on success.

HAL_CAN_OpenStreamSession()

void HAL_CAN_OpenStreamSession	(	uint32_t *	sessionHandle,
		uint32_t	messageID,
		uint32_t	messageIDMask,
		uint32_t	maxMessages,
		int32_t *	status
	)

Opens a CAN stream.

Parameters

[out]	sessionHandle	output for the session handle
[in]	messageID	the message ID to read
[in]	messageIDMask	the mssage ID mask
[in]	maxMessages	the maximum number of messages to stream
[out]	status	Error status variable. 0 on success.

HAL_CAN_ReadStreamSession()

void HAL_CAN_ReadStreamSession	(	uint32_t	sessionHandle,
		struct HAL_CANStreamMessage *	messages,
		uint32_t	messagesToRead,
		uint32_t *	messagesRead,
		int32_t *	status
	)

Reads a CAN stream message.

Parameters

[in]	sessionHandle	the session handle
[in]	messages	array of messages
[in]	messagesToRead	the max number of messages to read
[out]	messagesRead	the number of messages actually read
[out]	status	Error status variable. 0 on success.

HAL_CAN_ReceiveMessage()

void HAL_CAN_ReceiveMessage	(	uint32_t *	messageID,
		uint32_t	messageIDMask,
		uint8_t *	data,
		uint8_t *	dataSize,
		uint32_t *	timeStamp,
		int32_t *	status
	)

Receives a CAN message.

Parameters

[out]	messageID	store for the received message ID
[in]	messageIDMask	the message ID mask to look for
[out]	data	data output (8 bytes)
[out]	dataSize	data length (0-8 bytes)
[out]	timeStamp	the packet received timestamp (based off of CLOCK_MONOTONIC)
[out]	status	Error status variable. 0 on success.

HAL_CAN_SendMessage()

void HAL_CAN_SendMessage	(	uint32_t	messageID,
		const uint8_t *	data,
		uint8_t	dataSize,
		int32_t	periodMs,
		int32_t *	status
	)

Sends a CAN message.

Parameters

[in]	messageID	the CAN ID to send
[in]	data	the data to send (0-8 bytes)
[in]	dataSize	the size of the data to send (0-8 bytes)
[in]	periodMs	the period to repeat the packet at. Use HAL_CAN_SEND_PERIOD_NO_REPEAT to not repeat.
[out]	status	Error status variable. 0 on success.