Solenoid.h

Go to the documentation of this file.

// Copyright (c) FIRST and other WPILib contributors.
// Open Source Software; you can modify and/or share it under the terms of
// the WPILib BSD license file in the root directory of this project.
 
#pragma once
 
#include <memory>
 
#include <hal/Types.h>
#include <units/time.h>
#include <wpi/sendable/Sendable.h>
#include <wpi/sendable/SendableHelper.h>
 
#include "frc/PneumaticsBase.h"
#include "frc/PneumaticsModuleType.h"
 
namespace frc {
 
/**
 * Solenoid class for running high voltage Digital Output on a pneumatics
 * module.
 *
 * The Solenoid class is typically used for pneumatics solenoids, but could be
 * used for any device within the current spec of the module.
 */
class Solenoid : public wpi::Sendable, public wpi::SendableHelper<Solenoid> {
 public:
  /**
   * Constructs a solenoid for a specified module and type.
   *
   * @param module The module ID to use.
   * @param moduleType The module type to use.
   * @param channel The channel the solenoid is on.
   */
  Solenoid(int module, PneumaticsModuleType moduleType, int channel);
 
  /**
   * Constructs a solenoid for a default module and specified type.
   *
   * @param moduleType The module type to use.
   * @param channel The channel the solenoid is on.
   */
  Solenoid(PneumaticsModuleType moduleType, int channel);
 
  ~Solenoid() override;
 
  Solenoid(Solenoid&&) = default;
  Solenoid& operator=(Solenoid&&) = default;
 
  /**
   * Set the value of a solenoid.
   *
   * @param on Turn the solenoid output off or on.
   */
  virtual void Set(bool on);
 
  /**
   * Read the current value of the solenoid.
   *
   * @return The current value of the solenoid.
   */
  virtual bool Get() const;
 
  /**
   * Toggle the value of the solenoid.
   *
   * If the solenoid is set to on, it'll be turned off. If the solenoid is set
   * to off, it'll be turned on.
   */
  void Toggle();
 
  /**
   * Get the channel this solenoid is connected to.
   */
  int GetChannel() const;
 
  /**
   * Check if solenoid is Disabled.
   *
   * If a solenoid is shorted, it is added to the DisabledList and
   * disabled until power cycle, or until faults are cleared.
   *
   * @see ClearAllPCMStickyFaults()
   *
   * @return If solenoid is disabled due to short.
   */
  bool IsDisabled() const;
 
  /**
   * Set the pulse duration in the PCM. This is used in conjunction with
   * the startPulse method to allow the PCM to control the timing of a pulse.
   * The timing can be controlled in 0.01 second increments.
   *
   * @param duration The duration of the pulse, from 0.01 to 2.55 seconds.
   *
   * @see startPulse()
   */
  void SetPulseDuration(units::second_t duration);
 
  /**
   * %Trigger the PCM to generate a pulse of the duration set in
   * setPulseDuration.
   *
   * @see setPulseDuration()
   */
  void StartPulse();
 
  void InitSendable(wpi::SendableBuilder& builder) override;
 
 private:
  std::shared_ptr<PneumaticsBase> m_module;
  int m_mask;
  int m_channel;
};
 
}  // namespace frc