| ArmFeedforward |
A helper class that computes feedforward outputs for a simple arm (modeled as a motor acting
against the force of gravity on a beam suspended at an angle).
|
| BangBangController |
Implements a bang-bang controller, which outputs either 0 or 1 depending on whether the
measurement is less than the setpoint.
|
| ControlAffinePlantInversionFeedforward<States extends Num,Inputs extends Num> |
Constructs a control-affine plant inversion model-based feedforward from given model dynamics.
|
| DifferentialDriveAccelerationLimiter |
Filters the provided voltages to limit a differential drive's linear and angular acceleration.
|
| DifferentialDriveFeedforward |
A helper class which computes the feedforward outputs for a differential drive drivetrain.
|
| DifferentialDriveWheelVoltages |
Motor voltages for a differential drive.
|
| ElevatorFeedforward |
A helper class that computes feedforward outputs for a simple elevator (modeled as a motor acting
against the force of gravity).
|
| HolonomicDriveController |
This holonomic drive controller can be used to follow trajectories using a holonomic drivetrain
(i.e.
|
| ImplicitModelFollower<States extends Num,Inputs extends Num,Outputs extends Num> |
Contains the controller coefficients and logic for an implicit model follower.
|
| LinearPlantInversionFeedforward<States extends Num,Inputs extends Num,Outputs extends Num> |
Constructs a plant inversion model-based feedforward from a LinearSystem. |
| LinearQuadraticRegulator<States extends Num,Inputs extends Num,Outputs extends Num> |
Contains the controller coefficients and logic for a linear-quadratic regulator (LQR).
|
| LTVDifferentialDriveController |
The linear time-varying differential drive controller has a similar form to the LQR, but the
model used to compute the controller gain is the nonlinear model linearized around the
drivetrain's current state.
|
| LTVUnicycleController |
The linear time-varying unicycle controller has a similar form to the LQR, but the model used to
compute the controller gain is the nonlinear model linearized around the drivetrain's current
state.
|
| PIDController |
Implements a PID control loop.
|
| ProfiledPIDController |
Implements a PID control loop whose setpoint is constrained by a trapezoid profile.
|
| RamseteController |
Ramsete is a nonlinear time-varying feedback controller for unicycle models that drives the model
to a desired pose along a two-dimensional trajectory.
|
| SimpleMotorFeedforward |
A helper class that computes feedforward outputs for a simple permanent-magnet DC motor.
|