WPILibC++  2020.3.2-60-g3011ebe
frc::PWMVenom Class Reference

Playing with Fusion Venom Smart Motor with PWM control. More...

#include <PWMVenom.h>

Inheritance diagram for frc::PWMVenom:
frc::PWMSpeedController frc::PWM frc::SpeedController frc::MotorSafety frc::Sendable frc::SendableHelper< PWM > frc::PIDOutput frc::ErrorBase

Public Member Functions

 PWMVenom (int channel)
 Construct a Venom connected via PWM. More...
 
 PWMVenom (PWMVenom &&)=default
 
PWMVenomoperator= (PWMVenom &&)=default
 
- Public Member Functions inherited from frc::PWMSpeedController
 PWMSpeedController (PWMSpeedController &&)=default
 
PWMSpeedControlleroperator= (PWMSpeedController &&)=default
 
void Set (double value) override
 Set the PWM value. More...
 
double Get () const override
 Get the recently set value of the PWM. More...
 
void SetInverted (bool isInverted) override
 Common interface for inverting direction of a speed controller. More...
 
bool GetInverted () const override
 Common interface for returning the inversion state of a speed controller. More...
 
void Disable () override
 Common interface for disabling a motor.
 
void StopMotor () override
 Common interface to stop the motor until Set is called again.
 
void PIDWrite (double output) override
 Write out the PID value as seen in the PIDOutput base object. More...
 
- Public Member Functions inherited from frc::PWM
 PWM (int channel)
 Allocate a PWM given a channel number. More...
 
 ~PWM () override
 Free the PWM channel. More...
 
 PWM (PWM &&)=default
 
PWMoperator= (PWM &&)=default
 
void GetDescription (wpi::raw_ostream &desc) const override
 
virtual void SetRaw (uint16_t value)
 Set the PWM value directly to the hardware. More...
 
virtual uint16_t GetRaw () const
 Get the PWM value directly from the hardware. More...
 
virtual void SetPosition (double pos)
 Set the PWM value based on a position. More...
 
virtual double GetPosition () const
 Get the PWM value in terms of a position. More...
 
virtual void SetSpeed (double speed)
 Set the PWM value based on a speed. More...
 
virtual double GetSpeed () const
 Get the PWM value in terms of speed. More...
 
virtual void SetDisabled ()
 Temporarily disables the PWM output. More...
 
void SetPeriodMultiplier (PeriodMultiplier mult)
 Slow down the PWM signal for old devices. More...
 
void SetZeroLatch ()
 
void EnableDeadbandElimination (bool eliminateDeadband)
 Optionally eliminate the deadband from a speed controller. More...
 
void SetBounds (double max, double deadbandMax, double center, double deadbandMin, double min)
 Set the bounds on the PWM pulse widths. More...
 
void SetRawBounds (int max, int deadbandMax, int center, int deadbandMin, int min)
 Set the bounds on the PWM values. More...
 
void GetRawBounds (int32_t *max, int32_t *deadbandMax, int32_t *center, int32_t *deadbandMin, int32_t *min)
 Get the bounds on the PWM values. More...
 
int GetChannel () const
 
- Public Member Functions inherited from frc::MotorSafety
 MotorSafety (MotorSafety &&rhs)
 
MotorSafetyoperator= (MotorSafety &&rhs)
 
void Feed ()
 Feed the motor safety object. More...
 
void SetExpiration (double expirationTime)
 Set the expiration time for the corresponding motor safety object. More...
 
double GetExpiration () const
 Retrieve the timeout value for the corresponding motor safety object. More...
 
bool IsAlive () const
 Determine if the motor is still operating or has timed out. More...
 
void SetSafetyEnabled (bool enabled)
 Enable/disable motor safety for this device. More...
 
bool IsSafetyEnabled () const
 Return the state of the motor safety enabled flag. More...
 
void Check ()
 Check if this motor has exceeded its timeout. More...
 
- Public Member Functions inherited from frc::ErrorBase
 ErrorBase (const ErrorBase &)=default
 
ErrorBaseoperator= (const ErrorBase &)=default
 
 ErrorBase (ErrorBase &&)=default
 
ErrorBaseoperator= (ErrorBase &&)=default
 
virtual ErrorGetError ()
 Retrieve the current error. More...
 
virtual const ErrorGetError () const
 Retrieve the current error. More...
 
virtual void ClearError () const
 Clear the current error information associated with this sensor.
 
virtual void SetErrnoError (const wpi::Twine &contextMessage, wpi::StringRef filename, wpi::StringRef function, int lineNumber) const
 Set error information associated with a C library call that set an error to the "errno" global variable. More...
 
virtual void SetImaqError (int success, const wpi::Twine &contextMessage, wpi::StringRef filename, wpi::StringRef function, int lineNumber) const
 Set the current error information associated from the nivision Imaq API. More...
 
virtual void SetError (Error::Code code, const wpi::Twine &contextMessage, wpi::StringRef filename, wpi::StringRef function, int lineNumber) const
 Set the current error information associated with this sensor. More...
 
virtual void SetErrorRange (Error::Code code, int32_t minRange, int32_t maxRange, int32_t requestedValue, const wpi::Twine &contextMessage, wpi::StringRef filename, wpi::StringRef function, int lineNumber) const
 Set the current error information associated with this sensor. More...
 
virtual void SetWPIError (const wpi::Twine &errorMessage, Error::Code code, const wpi::Twine &contextMessage, wpi::StringRef filename, wpi::StringRef function, int lineNumber) const
 Set the current error information associated with this sensor. More...
 
virtual void CloneError (const ErrorBase &rhs) const
 
virtual bool StatusIsFatal () const
 Check if the current error code represents a fatal error. More...
 
void ClearGlobalErrors ()
 Clear global errors.
 
- Public Member Functions inherited from frc::SendableHelper< PWM >
 SendableHelper (const SendableHelper &rhs)=default
 
 SendableHelper (SendableHelper &&rhs)
 
SendableHelperoperator= (const SendableHelper &rhs)=default
 
SendableHelperoperator= (SendableHelper &&rhs)
 
std::string GetName () const
 Gets the name of this Sendable object. More...
 
void SetName (const wpi::Twine &name)
 Sets the name of this Sendable object. More...
 
void SetName (const wpi::Twine &subsystem, const wpi::Twine &name)
 Sets both the subsystem name and device name of this Sendable object. More...
 
std::string GetSubsystem () const
 Gets the subsystem name of this Sendable object. More...
 
void SetSubsystem (const wpi::Twine &subsystem)
 Sets the subsystem name of this Sendable object. More...
 
- Public Member Functions inherited from frc::SpeedController
virtual void SetVoltage (units::volt_t output)
 Sets the voltage output of the SpeedController. More...
 

Additional Inherited Members

- Public Types inherited from frc::PWM
enum  PeriodMultiplier { kPeriodMultiplier_1X = 1, kPeriodMultiplier_2X = 2, kPeriodMultiplier_4X = 4 }
 Represents the amount to multiply the minimum servo-pulse pwm period by. More...
 
- Static Public Member Functions inherited from frc::MotorSafety
static void CheckMotors ()
 Check the motors to see if any have timed out. More...
 
- Static Public Member Functions inherited from frc::ErrorBase
static void SetGlobalError (Error::Code code, const wpi::Twine &contextMessage, wpi::StringRef filename, wpi::StringRef function, int lineNumber)
 
static void SetGlobalWPIError (const wpi::Twine &errorMessage, const wpi::Twine &contextMessage, wpi::StringRef filename, wpi::StringRef function, int lineNumber)
 
static Error GetGlobalError ()
 Retrieve the last global error.
 
static std::vector< ErrorGetGlobalErrors ()
 Retrieve all global errors.
 
- Protected Member Functions inherited from frc::PWMSpeedController
 PWMSpeedController (int channel)
 Constructor for a PWM Speed Controller connected via PWM. More...
 
void InitSendable (SendableBuilder &builder) override
 Initializes this Sendable object. More...
 
- Protected Member Functions inherited from frc::SendableHelper< PWM >
void SetName (const wpi::Twine &moduleType, int channel)
 Sets the name of the sensor with a channel number. More...
 
void SetName (const wpi::Twine &moduleType, int moduleNumber, int channel)
 Sets the name of the sensor with a module and channel number. More...
 
void AddChild (std::shared_ptr< Sendable > child)
 Add a child component. More...
 
void AddChild (void *child)
 Add a child component. More...
 
- Protected Attributes inherited from frc::ErrorBase
Error m_error
 

Detailed Description

Playing with Fusion Venom Smart Motor with PWM control.

Note that the Venom uses the following bounds for PWM values. These values should work reasonably well for most controllers, but if users experience issues such as asymmetric behavior around the deadband or inability to saturate the controller in either direction, calibration is recommended.

  • 2.004ms = full "forward"
  • 1.520ms = the "high end" of the deadband range
  • 1.500ms = center of the deadband range (off)
  • 1.480ms = the "low end" of the deadband range
  • 0.997ms = full "reverse"

Constructor & Destructor Documentation

◆ PWMVenom()

frc::PWMVenom::PWMVenom ( int  channel)
explicit

Construct a Venom connected via PWM.

Parameters
channelThe PWM channel that the Venom is attached to. 0-9 are on-board, 10-19 are on the MXP port

The documentation for this class was generated from the following file: